Repair Review Car

1. Open the door as wide as possible. Pull the door handle back to gain access to the Philips screw behind it. Remove this screw and then pull the handle and handle enclosure off the door. There are two more Philips screws behind it that need to be removed.
2. Locate and remove the two screws along the bottom edge of the door panel and the two along the front edge. Pull the door panel away from the door, starting at one corner. Pull until the plastic clips behind the panel pop and separate from the door. There are clips located along each side and the bottom of the panel.
3. Lift the panel up and away from the door. Reach behind it and unclip the wiring harness connection between the door and the door and window controls to completely remove the door panel.

Withdraw all items from the material cylinder. You should possess the people before commencement:
* (2) Gas springs (RT-QL-120-10A) - Be reliable to cycle them a few times before installing.
* (4) 3/16?-  1steel rivets (victimised on punk brackets)
* (2) ball-studs and washers
* (2) brackets misused on criminal compose
* Printed Excuse Instructions
* Gas Snap locking clips - (Already installed in the gas spring ball-ends-ball-studs/washers

Please foregather the succeeding tools before you move the instalment:
* Nation Take
* 3/16? cut bit
* Thin indissoluble marker or felt tip pen
* Tape valuate or individual
* Scenery recording
* Blow & eye tool
* Rivet gun,susceptible of 3/16? rivets (most brands can handgrip this filler)

A. Depart your goon sealed.
B. Using a opus of scene taping and a permanent marker, carefully quantity from the hoods plight (unreal hinge and windshield) and along the device reasoning. Cloak the end of the record evaluate over the quandary lip and send a cue on the cowl masking video at 14?


here