Repair Review Car

1. Plug the OBD II scan tool connector into the socket to the left and slightly below the steering wheel.
2. Turn the ignition switch to ON.
3. Press the power button on the scan tool, if it does not come on automatically. Wait for the tool to complete the scanning process.
4. Press the Reset or Erase button on the scan tool to reset the computer codes.

1. Engage the emergency brake. Open the armrest to reveal the inside of the center console storage compartment. Remove personal items from the storage compartment.
2. Remove the two screws connected to the armrest located on the inside of the storage compartment.
3. Remove the cover on the gearshift lever by removing the two screws located near the top of the cup holder compartment.
4. Remove the two screws on the inside of the storage compartment housing on the floor closest to the gear shift.
5. Disconnect the left and right rear window switches located on the rear wall inside the storage compartment. Disconnect the connector from the floor on the inside of the storage compartment.
6. Remove the four remaining screws from the inside of the storage compartment housing. The screws are located near the rear of the housing on the floor. Set the shift lever to neutral and remove the housing.